Separates grass from tended areas for a neater and more easily maintained appearance.

Enjoy carefree, low maintenance gardening.

Easy one-time installation for all of your landscape needs:

Around walkways, driveways, patios, paths, and swimming pools.

Around shrubs and trees.

Permanent landscape areas.

Easy steps to a beautiful landscape area:

With a sharpshooter type flat spade, cut a narrow trench along the line where your edging is to be installed.

Use a rocking motion to create a "V" shaped trench so that 1' of the edging will be above the ground.

Place the edging into the trench.

Use BraceNBlock™ Edge Splice Connectors, 90° Right Angle Connectors, and End Connectors if needed.

Backfill on both sides of the edging and tamp until firm to complete the installation.

Installation may be easier if the soil is dampened.

The professional's choice in bracing garden bed soil while allowing excellent drainage; blocking plant roots, tree roots, and weeds from entering the bed; and without the use of anchoring stakes.

BraceNBlock™ Edge uses a root blocking fabric that lets water, air, oxygen, nutrients, and fertilizers pass through while blocking plant, tree, and weed roots and conserving soil moisture.

Stops flooded plant beds for healthier plants and less root suffocation and less root rot.

The choice for gardening experts.

Simple raised bed construction:

With a sharpshooter type flat spade, cut a narrow trench along the line where your edging is to be installed.

Place the edging into the trench with 6" of the edging below ground and 6" left above ground.

Use BraceNBlock™ Edge Splice Connectors, 90° Right Angle Connectors, and End Connectors if needed.

Backfill on both sides of the edging and tamp until firm to complete the installation.

Installation may be easier if the soil is dampened.

Add a high organic soil mix to build your elevated garden bed.

Construction of natural looking streams, ponds, and lakes.

Eliminates the unnatural looking "pond rock necklace."

Gives the versatility to install attractive ponds with or without rock borders.

Flexibility allows it to conform to any shaped stream, pond, or lake.

Installation is easier, faster, less laborious, and less expensive than conventional methods.

Keeps soil, mulch, chemicals, and fertilizers from entering the water.

Blocks tree roots from puncturing the pond liner.

Simple liner pond construction:

Trench BraceNBlock™ Edge 2"-3" above the planned water level at the excavated water's edge.

Place BraceNBlock™ Edge Splice Connectors every 1'-2' for support.

Tuck 6" of butyl liner into the trench on the outside of the placed BraceNBlock™ Edge.

Backfill the trench and add water to the stream, pond, or lake.

Blocks tree roots from growing underneath and invading residential and commercial foundations, sidewalks, driveways, and patios.

Blocks plant and tree roots from growing into plumbing and drainage pipes.

Protects homes, garages, fences, and commercial buildings from soil moisture absorption, water rot, and insect infestations when the top edge is placed 1" above the ground

Installation Instructions:

Dig a trench 23" deep along the foundation or marked landscape area.

Carefully measure and mark the edging to make exact, even cuts.

Lay in the edging with 1" of the edging above ground and 23" below ground.

To splice two ends together simply overlap the two ends at least 6" over one another. Place duct tape across the overlapped seams on both sides before backfilling with soil. Pack both sides of the edging with soil and press down firmly.

Unique, patented, double sided, metal mesh design allows it to adhere to and grab the surrounding soil holding it securely in place and resulting in excellent soil retention. This innovative soil erosion and sediment control technology prevents washouts under the silt fence which is one of the major problems with traditional silt fence installation.

Water permeable allowing better soil rentention and erosion and sediment control while allowing excellent water drainage.

Can be used as a retaining wall.

Easy to use and install.

Bendable and flexible allowing it to conform to any installation need.

Light weight and easy to handle.

Easy to cut.

Installation is easier, faster, and less laboriors.

Simple, easy silt fence installation instructions:

Dig an 8 inch deep trench along the silt fence alignment.

Drive steel or hardwood wooden posts 36 inches long at least 16 inches below the ground along the trench every 6 to 8 feet and at splice locations.

Place BraceNBlock™ Edge Silt Fence in the trench at least 8 inches below the ground, overlap the ends at least 6 inches at the splice locations, and wire the silt fence to the posts.

Backfill the trench and compact the soil on both sides of the silt fence.